June 5th, 2009 at 2:02 am (Construction, Engineering)
Airplane Hangars offer numerous benefits to the owner. Hangars not only protect but also preserve as repair works can be carried out inside the airplane hangars. Mentioned below are some of the benefits that prefab airplane hangars provide:
- Various sections of Prefab airplane hangars are constructed in factory and transporter to the construction site for assembling. This process takes very less time as compared to the construction of other types of airplane hangars namely, wooden and concrete.
- Airplane hangars made of steel and metal can be prefabricated. Prefab airplane hangars have very low costs of construction as the cost of labor gets greatly reduced.
- Maintenance costs Prefab airplane hangars is also low, which further have made them very popular among buyers.
- Prefab airplane hangars made from steel or metal are environment friendly and do not add any pollutants to the atmosphere.
Social tagging: aircrafts hangars, airplane hangars, hangar, hangars, metal hangars, prefab airplane hangars, steel airplane hangars, steel hangars
May 18th, 2009 at 4:51 am (Engineering)
For achieving the best results, the Fixture Plate must be accurately positioned and secured efficiently to the table. In addition to this, the plates should have accurately spaced and equally distanced threaded holes in lieu of doing away with a calculator. Besides, the plate should have a fast way to indexed to the origin of the bolt-hole pattern.
Plate fixtures have a considerably wide base, with the main fixture surface parallel to the mounting surface, the machine’s worktable. They are mostly used with vertical-spindle workstations and are capable of accommodating both rational and prismatic parts.
Social tagging: CMM fixture, CMM fixtures, fixture plate
May 7th, 2009 at 9:45 pm (Engineering)
An appropriate pressure which is needed is 10-20 psi for the water to activate your pre-glued dowel pins. If glue is what you have been preferring, the time needs to be decreased in that case. This procedure is pivotal to allow the glue valve to get opened and avoid injecting too much water into the hole.
Other Significant Considerations While Using Pre-Glued Dowel Pins
The higher the pressure, the better it is. Glue nozzles get cleaned themselves if pressure is higher. Last but not the least, if glue nozzles are constantly cleaned, they will certainly perform better and with much more effectiveness and efficiency.
Social tagging: commercial dowel pins, dowel pins, pre-glued dowel pins, standard dowel pins, tapered dowel pins